Polyurethane Hazard Tactile Mat

Hazard Polyurethane Mats

Polyurethane Tactile Hazard mats are ideal for indoor and outdoor retrofit projects where it is costly or not worth the time to remove the existing substrate. The use of mats whether internally or externally is a very fast and efficient way of creating a crossing or highlighting a hazard. The mats are supplied with a self-adhesive backing that makes installation onto most substrates easy and fast. Adhesive is recommended for installation onto asphalt. These mats are extremely durable and UV resistant due to the care and dedication of the inventors' secret set of ingredients that make the durability of this product possible.

BENEFITS
• Extremely hard-wearing
• Efficient, fast installation of hazard areas
• Excellent anti-slip rating
• Easy to install
• Retrofit installation

 

DIMENSIONS 

300x300mm

COMPOSITION

Manufactured from thermoplastic polyurethane, with checker pattern on the surface of raised hazards for extra slip resistance. UV stable, non-fading material.

TYPES

Hazard and directional mats for use on all substrates

SLIP RESISTANCE

Pathfinder Tactile Indicators provide excellent slip resistance and have been tested by the CSIRO, test numbers 2466.08s, 2020sa and 2466.07s. New Zealand test by Opus International Consultants. Lab ref no. 1-L0050.00 test 002/05. Details available from Total Tactilez.

CHEMICAL RESISTANCE

Pathfinder Tactile Indicators are resistant to most common acids, alkalis, oils and greases.

INSTALLATION 

Must be in accordance with PFSA installation instructions. Pathfinder Polyurethane Tactile Indicators are suitable for internal and external application.

STANDARDS

Pathfinder tactile indicators conform to the following standards: AS/NZS1428.4.1:2009 and RTS14:2007

WARRANTY

PFSA warrants all their products within the terms of PFSA standard warranty, against specific suitable installation when installed correctly as per PFSA installation procedure. Consult Total Tactilez for any specific test reports if required.

PFSA Tactile Studs, are produced from high-quality urethane materials, that are injection moulded to form a very tough, ultra-strong mat. Achieving a very high anti-slip rating, the PFSA Tactile Mats can be used for both indoor and outdoor use and is no doubt, New Zealand's most popular retrofit system for mats. All designed and produced according to various standards from New Zealand, Australia and the UK, our Tactile mats are fully compliant and meet with excellence, RTS14 & AS/NZS 1428.4.1.2009.

Suitable applications are to concrete, pavers, bluestone, basalt, granite, asphalt, timber decking, vinyl, Marmoleum and composite flooring etc.

We can provide supply and install on any of these products, New Zealand wide.