The CS AutoCav® is our flagship automated cavity slider. To make things easy for you, we've packaged this product into four different models, depending on the application required:
This automated pocket door incorporates basic safety along with simple to operate switches. Wall mounted switches are included. Single jamb mounted safety beams are available if required.Battery backup and locking functionality are not included with this model.
Designed to provide the minimum level of automation for the home or business, this unit is designed to complete an open cycle after a manual start with a D-Pull handle. The door will hold open for three seconds (adjustable) and then slowly close again. Battery backup and locking are not available with this model.
This model is fully customisable to include a range of operating devices and options. Battery backup is provided, giving 24 hours continual use on mains failure.Locking function and jamb mounted safety beams are also standard if required.
A complete automated toilet door control system commonly specified in public bathrooms. Click here for more information.Jambs types available: powder coated or anodised aluminium, or timber jambs (flat or grooved).
Scope of use
CS AutoCav Cavity Slider units are suitable for use in internal locations in residential, commercial and light industrial buildings.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3, B1.3.3(a), B1.3.3(f), B1.3.3(h), B1.3.3(j), B1.3.4
- Clause B2 Durability: Performance B2.3.1, B2.3.1(c)
- Clause F2 Hazardous building materials: Performance F2.3.1
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
CS AutoCav is an alternative solution in terms of NZ Building Code compliance.
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
CS Automatic Units have been successfully used in commercial, residential and institutional projects in New Zealand and Australia since 1991. CS Automatic Units are backed by a 5 Year Written Guarantee.
Jamb type & finish:
- Timber flat, timber grooved, in clear pine or nominated species
- AluSealed aluminium grooved jambs
Can be specified with almost any choice of door, including aluminium CS DoorLeaves.
Door carrying capacity 240kg.
Lintels over the full trim size (opening and pocket) should be sized to ensure that no load is applied to the door assembly. Lintels to NZS3604 are acceptable for door weights up to 75kg per metre width of door. Specific design required when the door weight exceeds 75kg per metre.
Nominate which side of the cavity pocket the maintenance access panel will be situated.
Refer to CS FOR DOORS detailed instructions for preparation and finishing of the door opening and final door installation.
Regular maintenance checks should be carried out in accordance wth the instructions on the operation manual supplied with the unit. Any service requirements should be referred to one of our four branches
5 year warranty applies to CS Automatic Units. (12 months on electronic components).
Door leaves carry the warranty of the original manufacturer.
CS FOR DOORS is 100% New Zealand owned and all products are 100% New Zealand made.
||New Zealand Made