The Tekton Weatherization System consists of Tekton Building Wrap and Tekton Seam Tape together with Protecto Wrap One Piece Sill Tape or The Protecto Wrap Sill System. The Tekton weatherization System is used behind wall claddings to form a secondary weather resistant barrier for timber and steel framed buildings. The Tekton Building Wrap is fixed directly to the outside of the framing. The building wrap over the openings is then cut and fixed to the inside face of the framing. Tekton Seam Tape is applied over the seams and Protecto Wrap One Piece Sill Tape or The Protecto Wrap Sill System installed around the openings.
The Marshall® Weatherization System has been appraised for use on buildings within the following scope:
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
This is an Alternative Solution in terms of the New Zealand Building Code
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Tekton Weatherization System is an Alternative Solution in terms of New Zealand Building Code compliance.
The product has and can make available the following additional evidence to support the above statements:
Please refer to Marshall Weatherization System Technical Specification for technical product details, guidance and limitations.
Please refer to Marshall Weatherization System Specification and BRANZ Appraisal # 621 (2020) for full details of installation.
Marshall Weatherization System must be installed by or under the guidance of an Licensed Building Practitioners
All products used in the Marshall Weatherization System are warranted to be free of defect in manufacture for a period of fifteen years. This warranty is limited to replacement of the products only. Marshall Innovations (the distributor) is not liable for incorrect installation or any accidental or willful damage.