Product Description
The Resene Construction System Integra LWC Facade System incorporates the latest cavity based construction technology providing a vented and drained cavity behind the cladding system, providing Airflo (drying rate) within the wall cavity. A composite exterior plaster cladding system made up of mechanically fixed Integra AAC (Autoclaved Aerated Concrete) panel, modified acrylic renders, weather protected base and low maintenance, versatile finish to ensure the integrity and durability of the entire system.
Scope of use
The Integra LWC Facade System is a pressure moderated cavity-based
external wall cladding system for residential and light commercial type
buildings where domestic construction techniques are used.
Timber Frame and Steel Frame Construction
Appropriate for use in all NZS3604 wind zones (including high). May be able to used in specific design wind pressures up to 2.5kPa.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3
- Clause B2 Durability: Performance B2.3.1(b), B2.3.1(c)
- Clause E2 External moisture: Performance E2.3.2
- Clause F2 Hazardous building materials: Performance F2.3.1
Maintenance requirements
Carry out an annual inspection and record this on the Resene Construction Systems Maintenance guide. For best results use Resene Paint Prep and Housewash liquid concentrate. Apply the diluted solution with a soft broom, and wash off with copious amounts of fresh water. Most detergents have a detrimental effect on fish life so avoid letting the washings run off into the storm-water system. DO NOT use harsh solvent based cleaners.
Environmental
Resene Construction Systems GreenSite® strategy is full circle. Raw material supply through to product application is considered with all products and systems. The process monitors the resources we use and the waste that is produced, whilst maintaining consideration of the environmental performance and the applications of our products. Resene Construction Systems Incorporates 'new' recyclable materials into products ensuring we don't compromise; Strength, durability, or integrity. Ultimately reducing our impact on the environment. New Recyclables that are currently included in virtually all Rockcote Systems are:
- EPS - new grind from local EPS manufacturers is incorporated into our lightweight plaster products such as LiteRock, and MAX render.
- Glass - refined recycled glass is incorporated into all Rockcote base renders replacing a natural component of sand as a filler.
