Cabot's Laminate Floor Restore
Got laminate floors at home? No worries! Cabot’s have you covered with their specially formulated Laminate Floor Restore. This is the ideal maintenance coating for use on interior laminate floors. Designed to rejuvenate and protect from daily wear, it brings the shine back to worn laminate floors making them look good as new again.
SPECS
-
AreasFloors
-
Clean UpWater
-
Sizes1L
-
SheenSatin
-
Coverage60 M2/L
-
Recoat Time1 Hours
-
Safety Data Sheet
PREPARATION
| Preparation |
Ensure the surface is thoroughly cleaned with Cabot’s Floor Clean prior to application of Cabot’s Laminate Floor Restore (following label directions). Cabot’s Floor Clean will remove dirt and dust to allow Laminate Floor Restore to properly adhere to the surface. Allow the surface to dry fully before applying Cabot’s Laminate Floor Restore. |
APPLICATION
| Application |
Important: Do NOT shake before use to minimise bubbles forming. 1. Apply 1 coat of Cabot’s Laminate Floor Restore with a sponge mop or Cabot’s Deck Coat lambswool applicator. Do not allow pools of liquid to form on the surface. 2. If required, apply 1 further coat following the same application method as above. Additional coats will increase gloss level and durability. 3. Allow the product to dry for a minimum of four hours before walking on the surface. |
MAINTENANCE
Clean laminate floors regularly with Cabot's Floor Clean to remove dirt, dust and grime. When the surface looks worn, and has lost its lustre, rejuvenate with Cabot's Laminate Floor Restore as a maintenance coat.
HOW TO VIDEOS
Sheen
Available sizes
Product Calculator
If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.
-
0 SQM
-
0 Litre
