Zincanode® 402
ZINCANODE® 402 is a two pack epoxy zinc rich primer formulated for cathodic corrosion resistance in harsh corrosive environments. ZINCANODE® 402 is recommended for use over abrasive blast cleaned steel surfaces, especially where overcoating is required without special mist or seal coat techniques.
ZINCANODE® 402 offers relatively high film builds without mud cracking and adhesion to field weld areas cleaned by power sanding or power wire brushing.
APAS 2916/1 assessed and confirmed to meet all requirements on specific certified products.
Tested in accordance with AS 4100-1998 – Steel Structures Appendix J – Standard Test for Evaluation of Slip Factor.
Certificate of test to AS/NZS 1530.3:1999 available for specific coating system and substrates.
Uses
ZINCANODE® 402 is specified for use in power generation plants, bulk handling equipment and oil refineries. Also in mining and chemical processes, offshore structures and exposed pipelines.
Benefits
- Protects against corrosion
- Cold cure hardener allows application during colder months
- No need to mist coat - saves time
Features
- Economical zinc rich epoxy
- Rapid dry and overcoat times
- Can topcoat with a range of coating types, such as epoxies, polyurethanes, and chlorinated rubbers
- Suitable for use in environments up to 200°C
- Provides excellent corrosion protection
- Cold cure hardener available