Nitoflor FC150 HP-FC 4L Pack

Nitoflor FC150 HP-FC 4L Pack
  • Nitoflor FC150 HP-FC 4L Pack
  • Nitoflor Colours

Nitoflor FC150 HP-FC

Solvent free, high build epoxy floor coating. Highly resistant to chemical attack and the action of forklift/commercial type traffic. Nitoflor FC150 HP-FC is non-taint during and after application and produces a satin finish.

 

Nitoflor Anti-Slip Grains 01 or 02 can be added to achieve defined slip resistance ratings. Refer to TDS for further information.

 

A range of colour finishes can be achieved with Nitoflor FC150 HP-FC by using the product in combination with Nitoflor Colour Pots.


Typical Applications

  • Food and chemical industries
  • Hospitals
  • Schools
  • Kitchens
  • High traffic applications

Advantages

  • Long lasting and easily maintained
  • Good resistance to many industrial chemicals
  • Highly resistant to the action of forklift vehicles and commercial type traffic
  • Slip resistance improves safety for plant and personnel
  • Provides an attractive satin finish
  • Can be used on horizontal and vertical surfaces, up to 1m from the floor level
  • Available in a wide range of colours including 11 Australian standard colours
  • Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values
  • Abrasion resistance : Medium
  • Chemical resistance : Medium - High
  • Foot traffic @ 20°C : 6 hours
  • Full cure @ 20°C : 4 days
  • Physical or chemical change : 21 g/l
  • Service temperature range : 55°C
  • Vehicle traffic @ 20°C : 12 hours

Overview

Typical Applications

  • Food and chemical industries
  • Hospitals
  • Schools
  • Kitchens
  • High traffic applications

Advantages

  • Long lasting and easily maintained
  • Good resistance to many industrial chemicals
  • Highly resistant to the action of forklift vehicles and commercial type traffic
  • Slip resistance improves safety for plant and personnel
  • Provides an attractive satin finish
  • Can be used on horizontal and vertical surfaces, up to 1m from the floor level
  • Available in a wide range of colours including 11 Australian standard colours
  • Complies with BCA for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values

Key Properties

  • Abrasion resistance : Medium
  • Chemical resistance : Medium - High
  • Foot traffic @ 20°C : 6 hours
  • Full cure @ 20°C : 4 days
  • Physical or chemical change : 21 g/l
  • Service temperature range : 55°C
  • Vehicle traffic @ 20°C : 12 hours

Test Certificates

Spec Clause

Detail Drawing

Fact Sheet

Brochures

Bulletins

Technical Data Sheet

Nitoflor FC150 HP-FC TDS