SUMNER Schist Cladding System - Bookmark this Page !

Our CODEMARK certificate has been revalidated through to until 2021.
On 24th January 2018 we updated all certificates, architectural drawings and documents below. Please use these for any building code compliance applications 2018 onwards.

Usage

Codemark Certificate

NZBC compliant system for stonework 20-60mm thick. eg Schist, Bluestone veneer etc.


SUMNER® pre-cladding is fitted by Licensed Building Practicioner (LBP) and then stonework is adhered over the SUMNER Board using SUMNER adhesive by approved applicatiors. Typical installations may include chimneys, feature walls, fireplaces, columns etc.


It is mandetory to submit the CODEMARK certificate (S0.0.1) when applying for building consent. Otherwise the council office does not know you are using our compliant system.


Kindly contact our office if your answers are not on this page.


DOWNLOADS

  1. Building Consent application documents

  2. CODEMARK provides streamlined 'front end' certification. Simple for council offices to approve but only if they know you are using a CODEMARKED system, and building within its intended scope. Building consent applications should include both the Certificate (S 0.0.1) and the Compliance form (S 0.0.2).
    s 0.0.1 CODEMARK Certificate of Conformity
    s 0.0.2 CODEMARK Compliance Form to identify scope

    Circling 'No' indicates work is within scope. Sign and submit the document.

    Circling 'Yes' requires identification and inclusion of architectural details for stonework outside of system scope prior to submition.

     

     

     

     

  3. Technical and Installation Manual

  4. Our CODEMARK certificate is now valid through to until November 2020. An updated certificate and architectural drawings are currently being uploaded. Please contact our office if you require urgent copies.

    s 1.0.0 SUMNER Technical & Installation Manual - 18th November 2017


     

  5. Written Specifications
  6.  

     

     

  7. Architectural Details
  8. All new SUMNER standard CODEMARKED details renewed for 2018. This includes REVIT and DWG CAD files as a basis for professionals to author their own project specific details. All specific details depicting stonework outside of system scope must be listed on s0.0.2 before consent applicaiton.

     

    Full Drawing Sets

    s 2.0.1 Full Set of Details in pdf format

    s 2.0.2 Full Set of Details in rvt format

    s 2.0.3 Full Set of Details in dwg format

    Over Timber or Steel Frame Construction

    s 2.1.0 Vertical XSection For Timber Foundation
    s 3.0.0 Slab edge - standard
    s 3.0.1 Slab edge - rebated

    s 3.1.0 Window detail elevation - basic
    s 3.1.1 Window detail plan - basic

    (Deep reveal window details under masonry section s3.1 below)

    s 3.2.0 Door detail elevation
    s 3.2.1 Door detail plan

    s 3.3.2 Abutment horizontal to weatherboard - elevation
    s 3.3.3 Abutment - internal corner to (weatherboard)
    s 3.3.4 Abutment vertical junction - plan
    s 3.3.5 Abutment internal corner (negative detail to other cladding)

    s 3.4.1 Roof detail - back sloping barge
    s 3.4.2 Roof detail - apron flashing
    s 3.4.3 Soffit termination / roof verge
    s 3.5.3 Meter Box detail
    s 3.5.5 Pipe Penetration Detail

    s 3.5.6 Vertical movement control joint.pdf
    s 3.5.7 Horizontal inter-Storey control joint.pdf

    s 4.0.0 Corner detail - internal
    s 4.0.1 Corner detail - external

    s 5.0.0 Internal to framework

    s 8.0.0 Post Frameout detail

    s 9.0 Parapet Detail

    Over Masonry Construction

    s 3.1.2 Window detail elevation - Deep reveal - masonry
    s 3.1.3 Window detail plan - Deep reveal - masonry

    s 7.0.0 Slab edge detail - inline masonry
    s 7.0.1 Slab edge detail - rebated masonry

     

     

     

  9. SUMNER Board Installation
  10. s 6.0.1 SUMNER Board installation - stone thickness less than 40mm.
    s 6.0.2 SUMNER Board installation - for stone thickness 40-60mm Thick.

     

     

      

  11. SUMNER Checklists - required for CCC
  12. These two forms need to be completed by the appropriate trades people and emailed to james@sumnerschist.co.nz. For more information about this process please refer our CCC webpage.

    s 9.1.1 SUMNER Builders Cavity Checklist (Builder)
    s 9.2.1 SUMNER Tiler Installation Checklist (Tile Installer)

     

     

     

     

  13. SUMNER Material Saftey Datasheets (MSDS)
  14. s 10.0.0 SUMNER Grip MSDS
    s 10.1.0 SUMNER Board MSDS
    s 10.2.0 SUMNER Primer MSDS
    s 10.3.0 SUMNER Battens MSDS

     

     

     

     

  15. Terms and Conditions
  16. Terms of Trade

     

SUMNER
Workflow

SUMNER Flowchart
FPB Logo
Quality Logo
Life Cycle Logo
Sustainability Logo
OS Logo Tile
Sumner Logo Tile
© Copyright 2013