|
|
|
Simpson Strong-Tie MPB Moment Post Base
Specifically designed to provide moment resistance for timber columns and posts.
|
|
|
|
|
|
Rockbond 1.12 Waterproof Mortar
|
Rockbond Special Concrete Products |
Forms a waterproof lining for areas where water is to be stored.
|
|
|
|
|
|
Mapei Mapegrout T60
|
Mapei Products (MBP (NZ) Ltd) |
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete
|
|
|
|
|
|
Simpson Strong-Tie CPT Concealed Post Base Tie
The CPT provides a clean, concealed look while providing a 25mm standoff height above concrete.
|
|
|
|
|
|
Simpson Strong-Tie HTT Tension Tie & Holdown
For heavy‑duty holdown applications on studs and offer a solution for resisting tension loads.
|
|
|
|
|
|
Simpson Strong-Tie AT-HP BLUE High-Performance Anchoring Adhesive
Suitable for structural fixing of threaded rod into concrete.
|
|
|
|
|
|
Canzac Joint Free concrete slabs
System for a joint free slab
|
|
|
|
|
|
Rockbond 8.04 Epoxy Mortar (2 PART)
|
Rockbond Special Concrete Products |
A 2-part 1:1 mouldable high-strength epoxy mortar.
|
|
|
|
|
|
Simpson Strong-Tie THD Titen HD Heavy Duty Screw Anchor - Concrete & Masonry
Mechanical interlock between the anchor and base material that requires little installation torque
|
|
|
|
|
|
Enduracoat CILT
Crack Injection Kit for Sealing cracks in concrete
|
|
|
|
|
|
Fosroc Nitofill LV
Low viscosity, dual cartridge, epoxy crack-injection system.
|
|
|
|
|
|
Simpson Strong-Tie ABU Adjustable Post Base
Designed to install on hardened concrete with either a cast‑in‑place or post‑installed anchor.
|
|
|
|
|
|
Simpson Strong-Tie VT-HP High Performance Chemical Anchor
Fast cure vinylester resin-based chemical anchor qualified for use in seismic regions - C1/C2
|
|
|
|
|
|
Simpson Strong-Tie IUC Face Fix Concealed Joist Hanger
A heavy-duty face-mount joist hanger provides cleaner lines for exposed conditions.
|
|
|
|
|
|
Mapei Mapefill SP
|
Mapei Products (MBP (NZ) Ltd) |
Premium super flow non-shrink
cementitious grout
|
|
|
|
|
|
Simpson Strong-Tie LSSR Slopeable & Skewable Rafter Hanger
The Rafter Hanger allows it to adjust for skew up to 45°, and hinged swivel seat to to a 45°.
|
|
|
|
|
|
Rockbond 8.07 Epoxy Mortar UW
|
Rockbond Special Concrete Products |
Simple 1:1 mix ratio, designed for underwater application.
|
|
|
|
|
|
Simpson Strong-Tie HTT4 Bracewall Holdown Kit
For external and internal 15kN bracewalls for concrete floors in accordance with NZS 3604:2011.
|
|
|
|
|
|
Mapei Eporip
|
Mapei Products (MBP (NZ) Ltd) |
Two-component solvent-free epoxy adhesive for joints & monolithic sealing of cracks in screeds
|
|
|
|
|
|
Simpson Strong-Tie SDWC Truss Screw
The Strong‑Drive® SDWC Truss Screw provides a truss and rafter-to-top plate connection.
|
|
|
|
|
|
High-Tech Spall TX3
HT Spall-TX3 is a rapid set, high strength low viscosity Polyurea concrete repair material.
|
|
|
|
|
|
Mapei Planitop HDM Maxi
|
Mapei Products (MBP (NZ) Ltd) |
Two-component ready-mixed high
ductility pozzolan-reaction fibre reinforced mortar
mortar
|
|
|
|
|
|
High-Tech Spall FX
HT Spall-FX is a rapid set, high strength ultra low viscosity
|
|
|
|
|
|
Simpson Strong-Tie DTT Tension Tie & Holdown
Designed for lighter duty holdown on studs or in horizontal applications as a tension tie.
|
|
|
|
|
|
Simpson Strong-Tie LUS Double Shear Joist Hanger
The LUS has Double-Shear Nailing. It distributes the load through two points on each joist nail.
|
|
|
|
|
|
Rockbond 4.00 Underwater Putty
|
Rockbond Special Concrete Products |
A cementitious putty which is non flowing, fibre reinforced, set accelerated and washout resistant.
|
|
|
|
|
|
Fosroc Concure CR
Chlorinated rubber based, curing compound.
|
|
|
|
|
|
Simpson Strong-Tie TNT Titen Turbo Concrete and Masonry Screw
Titen Turbo™ concrete and masonry screw anchor-Reliable installation. Less torque
|
|
|
|
|
|
Simpson Strong-Tie SAE Heavy Duty Face Fix Joist Hanger
A heavy-duty hanger designed for applications requiring additional strength.
|
|
|
|
|
|
Simpson Strong-Tie THDWH Titen HD Heavy Duty Screw Anchor with Washer Head
The washer-head design is commonly used where a minimal head profile is necessary.
|
|
|
|
