Suitable for mains and medium pressure residential applications only. The A16-A26 units are designed to be externally mounted on an outside wall. The A28i is designed for internal installations only and can be installed in an enclosure if the requirements of AS/NZS 5601.1 are satisfied. They are designed to be located as close as practicable to the most frequently used hot water outlets to reduce the delay for hot water delivery.
They are not suitable as a spa or swimming pool heater, for hydronic applications, or for commercial applications. The A16-A26 units are not suitable as a gas boost for solar installations as the temperature cannot be set high enough—only the A28i can be used as a gas boost.
Hard or acidic water will need to be treated to use this product.
Available for connection to natural gas or LPG, this must be specified at the time of purchase.
Flue terminations must comply with the flue terminal locations shown in AS/NZS 5601.1.
