Resene Aquapoxy is a two pack waterborne epoxy polyaminoamide floor coating. The cured film is glossy and non-yellowing with high surface hardness. It has excellent adhesion and water resistance, and is tolerant of application over damp surfaces. The chemical resistance is similar to conventional solventborne epoxies. Resene Aquapoxy is available modified with Resene SRG Grit to provide a non-skid surface. This is achieved with some sacrifice to cleanability. An excellent compromise consists of one coat of Resene SRG Grit modified Resene Aquapoxy followed by one coat of unmodified Resene Aquapoxy. Key Properties: VOC: 50 grams per litre mixed Usual no. of coats: 1 (wet on wet spray), 3 (brush/roller) Environmental Choice approved: Yes Made in New Zealand: Yes 100% NZ owned and operated Typical uses: • Bitumen floors to upgrade solvent resistance • Dairy units and piggeries • Food processing plants