Snaptex™ is a site built stretched fabric wall and ceiling system available in a wide range of decorative finishes. Panels can be large with sewn seams or panelized with expressed negative detail in square, round or bevel edges. For acoustic control a 25 or 50mm high density glass fibre absorber panel is fitted under the fabric.
Snaptex™ helps create unique upscale interiors, ideal for noise control in meeting rooms, cinema, theatre, music rooms, restaurants, hotels, healthcare facilities etc.
||New Zealand Made
||Member of New Zealand Green Building Council
Snaptex™ is used to help upscale interiors, ideal for noise control in meeting rooms, cinemas, theatres, music rooms, restaurants, hotels, healthcare facilities etc.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1, B2.3.2
- Clause C3 Fire affecting areas beyond the fire source: Performance C3.4
- Clause F2 Hazardous building materials: Performance F2.3.1
B2.3.1(c) - 5 years
The product has and can make available the following additional evidence to support the above statements:
Snaptex™ system comprises Snaptex fabric tensioning track fixed to wall, 25 or 50mm thick fire resistant glass fibre board with impact resistant Sonatex 250 acoustic facer for a firm feel under fabric. Finished with a decorative fabric stretched taut with Snaptex track. Low density polyester wadding can be added where a soft padded look is desired.
Limitations:Do not install in wet areas, for high impact zones consult Asona. Direct exposure to sun light may result in fabric fade.Fabric colour may vary batch to batch.
Maintenance: Fabric can be vacuumed to remove dust and regular cleaning agents used for spot removal. If required the fabric may be removed for cleaning or refurbishment
||Date last validated: 06 June 2014
||Date last updated: 06 June 2014
The Product Technical Statement (PTS) template is copyright to Construction Information Limited. However the content of this PTS is the responsibility of the product manufacturer/supplier.
Refer to the miproducts Terms and Conditions